Flushing System
AB-HYDRAULIK supports with flushing system with a flow of max.1000 l/min per unit. Multiple units can be inter-connected to increase flushing capacity. Each functional nit is fitted in a modular skid and can be used on any location around. The flushing system is provided with filtration in pressure and return line, filters in the return line are switchable between multiple filtration grades during flushing.
During the assembly and installation of the hydraulic system it is easily possible for dirt and other contamination to find their way into the pipes and other items of equipment. Therefore, it is necessary to flush out all this contamination so that it cannot have an adverse effect on the operation and life time of the equipment.
Flushing involves circulating hydraulic fluid through the system at high speed. The fast flowing fluid carries the particles of dirt along with it, to where they can be removed in a separate filter circuit. The duration and intensity of flushing depends on the required cleanliness of the system.
Automatic information logger, on USB stick or printable for a report on the spot:
- Contamination level readout according ISO or NAS:
- Saturation level: 0 ... 100% (water content)
- Temperature
- Flow
- Pressure
On-site support includes
Looping the piping system
Filter cartridges
Hydraulic hoses
Power cables
Transport and installation
Service Engineer
The flushing systems will always be operated by our own service engineers.
